Project 2: Parsing
The goal of this project is to give you experience in writing a top-down recursive descent parser and to get
introduced to the basics of symbol tables for nested scopes.
We begin by introducing the grammar of our language. Then we will discuss the semantics of our
language that involves lexical scoping rules and name resolution. Finally, we will go over a few examples
and formalize the expected output.
NOTE: This project is significantly more involved than the first project. You should start on it immediately.
1. Lexical Specification
Here is the list of tokens that your lexical analyzer needs to support:
Comments and Space
In addition to these tokens, our input programs might have comments thatshould be ignored by the
lexical analyzer.Acommentstartswith // andcontinues until a newline characteris encountered. The
regular expressions for comments is: // (any)* in which any is defined to be any character except
. Also, like in the first project, your lexical analyzer should skip space between tokens.
PUBLIC = “public”
PRIVATE = “private”
EQUAL = “=”
COLON = “:”
COMMA = “,”
SEMICOLON = “;”
LBRACE = “{”
RBRACE = “}”
ID = letter (letter + digit)*
2. Grammar
Here is the grammar for our input language:
Here is an example input program with comments:
Note that our grammar does not recognize comments, so our parser would not know anything about
comments, but our lexical analyzer would deal with comments. This is similar to handling of spaces by
the lexer, the lexer skips the spaces. In a similar fashion, your lexer should skip
program ® global_vars scope
global_vars ® e
global_vars ® var_list SEMICOLON
var_list ® ID
var_list ® ID COMMA var_list
scope ® ID LBRACE public_vars private_vars stmt_list RBRACE
public_vars ® e
public_vars ® PUBLIC COLON var_list SEMICOLON
private_vars ® e
private_vars ® PRIVATE COLON var_list SEMICOLON
stmt_list ® stmt
stmt_list ® stmt stmt_list
stmt ® ID EQUAL ID SEMICOLON
stmt ® scope
a, b, c; // These are global variables
test {
public:
a, b, hello; // These are public variables of scope test
private:
x, y; // These are private variables of scope test
a = b; // the body of test starts with this line
hello = c;
y = r;
nested { // this is a nested scope
public:
b; // which does not have private variables
a = b;
x = hello;
c = y;
// we can also have lines that only contain comments like this
}
}
comments.
We highlight some of the syntactical elements of the language:
Global variables are optional
The scopes have optional public and private variables
Every scope has a body which is a list of statements
A statement can be either a simple assignment or another scope (a nested scope)
3. Scoping and Resolving References
Here are the scoping rules for our language:
The public variables of a scope are accessible to its nested scopes
The private variables of a scope are not accessible to its nested scopes
Lexical scoping rules are used to resolve name references
Global variables are accessible to all scopes
Every reference to a variable is resolved to a specific declaration by specifying the variable's
defining scope. We will use the following notation to specify declarations:
• If variable a is declared in the global variables list, we use ::a to refer to it
• If variable a is declared in scope b, we use b.a to refer to it
 And if reference to name a cannot be resolved, we denote that by ?.a
Here is the example program from the previous section, with all name references resolved (look at the
comments):

4. Examples
The simplest possible program would be:
Let's add a global variable:
a, b, c;
test {
public:
a, b, hello;
private:
x, y;
a = b; // test.a = test.b
hello = c; // test.hello = ::c
y = r; // test.y = ?.r
nested {
public:
b;
a = b; // test.a = nested.b
x = hello; // ?.x = test.hello
c = y; // ::c = ?.y
}
}
main {
a = a; // ?.a = ?.a
}
a;
main {
a = a; // ::a = ::a
}
Now, let's add a public variable a:
Or a private a:
Now, let's see a simple example with nested scopes:
If we add a private variable in main:
a;
main {
public:
a;
a = a; // main.a = main.a
}
a;
main {
private:
a;
a = a; // main.a = main.a
}
a, b;
main {
nested {
a = b; // ::a = ::b
}
}
a, b;
main {
private:
a;
nested {
a = b; // ::a = ::b
}
}
And a public b:
You can find more examples by looking at the test cases and their expected outputs.
5. Expected Output
There are two cases:
In case the input does not follow the grammar, the expected output is:
NOTE: no extra information is needed here! Also, notice that we need the exact
message and it's case-sensitive.
In case the input follows the grammar:
For every assignment statement in the input program in order of their appearance in the
program, output the following information:
• The resolved left-hand-side of the assignment
• The resolved right-hand-side of the assignment
in the following format:
NOTE: You can assume that scopes have unique names and variable names in a single
scope (public and private) are not repeated.
a, b;
main {
public:
b;
private:
a;
nested {
a = b; // ::a = main.b
}
}
Syntax Error
resolved_lhs = resolved_rhs
For example, given the following input program:
The expected output is:
6. Implementation
Start by modifying the lexical analyzer from previous project to make it recognize the tokens
required for parsing this grammar. It should also be able to handle comments (skip them like
spaces).
NOTE: make sure you remove the tokens that are not used in this grammar from your
lexer, otherwise you might not be able to pass all test cases. Your TokenType type declaration
should look like this:
a, b, c;
test {
public:
a, b, hello;
private:
x, y;
a = b;
hello = c;
y = r;
nested {
public:
b;
a = b;
x = hello;
c = y;
}
}
test.a = test.b
test.hello = ::c
test.y = ?.r
test.a = nested.b
?.x = test.hello
::c = ?.y
typedef enum { END_OF_FILE = 0,
PUBLIC, PRIVATE,
EQUAL, COLON, COMMA, SEMICOLON,
LBRACE, RBRACE, ID, ERROR
} TokenType
Next, write a parser for the given grammar. You would need one function per each non-terminal
of the grammar to handle parsing of that non-terminal. I suggest you use the following signature
for these functions:
Where X would be replaced by the target non-terminal. The lexical analyzer object needs to be
accessible to these functions so that they can use the lexer to get and unget tokens. These functions
can be member functions of a class, and the lexer object can be a member variable of that class.
You also need a syntax_error function that prints the proper message and terminates
the program:
Test your parser thoroughly. Make sure it can detect any syntactical errors.
Next, write a symbol table that stores information about scopes and variables. You would also
need to store assignments in a list to be accessed after parsing is finished. You need to think
about how to organize all this information in a way that is useful for producing the required
output.
Write a function that resolves the left-hand- side and right-hand-side of all assignments and
produces the required output. Call this function in your main() function after successfully
parsing the input.
NOTE: you might need more time to finish the last step compared to previous steps.
7. Requirements
Here are the requirements of this project:
You should submit all your project files (source code [.cc] and headers[.h]) on
Gradescope. Do not zip them.
You should use C/C++, no other programming languages are allowed.
• Besides the provided test cases, you need to design test cases on your own to rigorously test your
implementation.
You should test your code on Ubuntu Linux 19.04 or greater with gcc 7.5.0 or higher.
void parse_X()
void syntax_error()
{
cout << “Syntax Error ”;
exit(1);
}
You cannot use library methods for parsing or regular expression (regex) matching in
projects. You will be implementing them yourself. If you have doubts about using a library
method, please check it with the instructor or TA beforehand.
You can write helper methods or have extra files, but they should have been written by you.
8. Evaluation
The submissions are evaluated based on the automated test cases on the Gradescope. Gradescope test cases
are hidden to students. Your grade will be proportional to the number of test cases passing. You have to
thoroughly test your program to ensure it pass all the possible test cases. It is not guaranteed that your code
will pass the Gradescope test cases if it passes the published test cases. As a result, in addition to the
provided test cases, you must design your own test cases to rigorously evaluate your implementation. If
your code does not compile on the submission website, you will not receive any points. On Gradescope,
when you get the results back, ignore the “Test err” case, it is not counted toward the grade.
The parsing test cases contain cases that are syntactically correct and cases that have syntax errors. If a
syntax test case has no syntax error, your program passes the test case if the output is not Syntax Error .
If a syntax test case has syntax error, your program passes the test case if the output is Syntax Error .
Note that if your program prints the syntax error message independently of the input, for example:
It will pass some of the test cases, but you will not receive any points.
You can access the Gradescope through the left side bar in canvas. You have already been enrolled in the
grade scope class, and using the left side bar in canvas you will automatically get into the Gradescope course.
int main()
{
cout << “Syntax Error ”;
return 0;
}

请加QQ：99515681  邮箱：99515681@qq.com   WX：codinghelp

标签：